Mr. Desh Deepak
Associate Professor
Coordinator Department of Automobile Engineering
EDUCATION
PROFESSIONAL EXPERIENCE
RESPONSIBILITIES AT WCTM
CERTIFICATIONS AND SHORT TERM COURSES
PUBLICATIONS AND PRESENTATIONS
RESEARCH SUMMARY
Mr. D.Deepak’s research work is concerned with the accurate determination of Hydrodynamic Coefficient of an underwater vehicle using CFD. Focus has been on more accurate detailing of flows using CFD applying higher computational power, making it expensive. The derivatives obtained from the simulation of the quasi‐static drift of the body with zero degree stern and rudder angle at various angles of attack and angular velocities give the stability HDCs. Stern and rudder angles control submarine motion and the simulation of the quasi‐static drift of the body with non‐zero degree stern and rudder angles give the control HDCs. This approach allows the development of templates ‐ which mesh and execute a set of quasi‐static CFD simulations to arrive at the values of the stability and control HDCs using modest computational resources and
cost ‐ for trajectory simulations of concept designs of underwater vehicles without expensive real time CFD simulations of these motions.
Dr. Brajendra Nath Tripathi
Associate Professor
Department Of Mechanical/Automobile Engineering
PROFESSIONAL EXPERIENCE
Teaching : 14 yrs.
Industry : 5 yrs.
(i) Worked for 5 years in Atul Glass Industries Ltd Faridabad Haryana.
RESPONSIBILITIES AT WCTM
Teach Fluid Mechanics, to the undergraduate students of Automobile Engineering .
PUBLICATIONS & PRESENTATIONS
1. Presented a paper on ‘Condition Monitoring of rotating equipments in Plant using Vibration Analysis’ at the National Seminar on ‘Advances in Automobile Engineering ’ held at Gurgaon Institute of Technology & Management, Gurgaon on 21st & 22nd February 2014.
2. Presented a paper on ‘Advances in the Shaft Sealing System of Centrifugal Pumps’ at the National Seminar on ‘Advances in Automobile Engineering ’ held at Dronacharya College of Engineering, Gurgaon on 22nd July 2009.
3. Presented a Paper on ‘Condition Monitoring at NFL Bathinda’ at a Seminar organized by National Productivity Council, New Delhi for Senior Engineers at New Delhi on 21st March 2000.
4. Paper ‘Problem Faced on Steam Turbine at NFL Bathinda, a Case Study’ was published in ‘Fertilizer News’ (a Technical Journal published by Fertilizer Association of India, New Delhi) in its February 1994 edition.
5. Paper ‘Failure of Ball Bearings & its Diagnosis by Vibration Analysis’ was published in ‘Chemical Engineering World’ in its May 1989 edition.
6. Paper ‘Air Compressor Failure at NFL Panipat, a Case History’ was published in ‘Fertilizer News’ in its November 1986 edition.
Mr. Vinay Kumar Sharma
Professor
Department Of Mechanical/Automobile Engineering
EDUCATION
B.Sc. (Engg.) Mechanical, Regional Engineering College, Rourkela (now a NIT) 1971
M.E. (Mech.)M/c Design, University of Roorkee, Roorkee (now an IIT) 1974
PROFESSIONAL EXPERIENCE
Teaching : 7.5 yrs.
Industry : 32 yrs.
(i) Worked for 27 years in Fertilizer Corporation of India Limited & in National Fertilizers Ltd.(A Govt. of India Undertaking) & held post of “Chief Manager” when left.
(ii) Worked for 5 yrs in Bandar Imam Petrochemical Co, Bandar Imam, Iran & Fanavaran Petrochemical Company, Bandar Imam, Iran, as a “Specialist Mechanical Engineer” for Condition Monitoring & Maintenance of Rotating Equipments.
SPECIAL TRAINING
RESPONSIBILITIES AT WCTM
Teach Strength of Materials, Mechanical Machine Design & Power Plant Engineering to the undergraduate students of Automobile Engineering .
PUBLICATIONS & PRESENTATIONS
1. Presented a paper on ‘Condition Monitoring of rotating equipments in Plant using Vibration Analysis’ at the National Seminar on ‘Advances in Automobile Engineering ’ held at Gurgaon Institute of Technology & Management, Gurgaon on 21st & 22nd February 2014.
2. Presented a paper on ‘Advances in the Shaft Sealing System of Centrifugal Pumps’ at the National Seminar on ‘Advances in Automobile Engineering ’ held at Dronacharya College of Engineering, Gurgaon on 22nd July 2009.
3. Presented a Paper on ‘Condition Monitoring at NFL Bathinda’ at a Seminar organized by National Productivity Council, New Delhi for Senior Engineers at New Delhi on 21st March 2000.
4. Paper ‘Problem Faced on Steam Turbine at NFL Bathinda, a Case Study’ was published in ‘Fertilizer News’ (a Technical Journal published by Fertilizer Association of India, New Delhi) in its February 1994 edition.
5. Paper ‘Failure of Ball Bearings & its Diagnosis by Vibration Analysis’ was published in ‘Chemical Engineering World’ in its May 1989 edition.
6. Paper ‘Air Compressor Failure at NFL Panipat, a Case History’ was published in ‘Fertilizer News’ in its November 1986 edition.
Mr. Prasanta Kumar Paul
Assistant Professor
Department Mechanical/Automobile Engineering
Mr. Prasanta Kumar Paul is a Professor in Department of Automobile Engineering . He is Post Graduate in Automobile Engineering with a proven track record first in Industry and then in academics as a consultant, designer, manager, teacher, mentor and can assess the potential of people to decide progress methodology of their further growth. He has 40 years of Industrial and teaching experience. Mr Paul’s Industrial experience covers large chemical plant design, Project management, Construction while his teaching experience covers training of industrial trainees, undergraduate and postgraduate students of engineering in India, Italy, Iran and Abu Dhabi. He was associated with Engineers India Limited, New Delhi, Triune Energy, Delhi, Skyline Institute of Engineering & Technology, Greater Noida, and JIS College of Engineering, Kalyani near Kolkata.
Mr. Anil Kumar Sarkar
Assistant Professor
Department Of Mechanical /Automobile Engineering
EDUCATION
PROFESSIONAL EXPERIENCE
RESPONSIBILITIES AT WCTM
TRAINING , WORKSHOP AND SHORT TERM COURSES
PUBLICATIONS AND PRESENTATIONS
INDUSTRIAL EXPERIENCE SUMMARY
Mr. Anil Kumar Sarkar 34 Years Of Experience Is About Refining Industry. The Different Activities Covered Are Maintence Of Refinery Equipment Like Turbine , Compressors, High Pressure Pumps.
Furnace ,Columns Water Treatmert Plant And Construction & Commissioning Of Grassroot
Refinery. As Deputy General Manager At Head Office Advises All The Refineries On Maintenance
Function .
Mr. Deepak Sharma
Assistant Professor
Department Of Mechanical/Automobile Engineering
EDUCATION:
B.Tech. (Automobile Engineering )‐ 2003 , Kurukshetra University, Kurukshetra
M.Tech. (Manufacturing and Automation)‐2011, M.D. University, Rohtak
Pursuing PhD (Automobile Engineering ), SMVDU, Katra, J & K, India
PROFESSIONAL EXPERIENCE
INDUSTRIAL: 02
TEACHING: 07
(Summary of Experience)
RESPONSIBILITIES AT WCTM
CERTIFICATIONS AND SHORT TERM COURSES
PUBLICATIONS AND CONFERENCE
RESEARCH SUMMARY
Pursuing PhD. in Automobile Engineering from Shri Mata Vaishno Devi University, Katra, Jammu and Kashmir under the guidance of Dr. Rajesh Kumar Bhushan (Associate Professor, Automobile Engineering , Guru Ghasidas University, a central university, Bilaspur, Chhattisgarh).
Registration no. : 12PHDEME01
Area of Research : Friction Stir Welding of Metal Matrix Composites
Status of Research : At the final stage of experiments and testing at IIT, Gandhi Nagar
Mr. Ravinder Kumar Anand
Assistant Professor
Department Of Mechanical/Automobile Engineering
EDUCATION
B.Engg. (Automobile Engineering )‐ 1995, MDU, Rohtak
MBA (Operation Management) from Indira Gandhi National Open University (IGNOU)
M.Tech. (Automobile Engineering )‐2008, UPTU, Lucknow.
Ph.D. (Pursuing) – Amity University, Noida
PROFESSIONAL EXPERIENCE
INDUSTRIAL : 4.9 years
TEACHING : 14 years
A). Teaching :- 13.9 Years
1) As Assistant Professor with Panipat Institute of Engineering and Technology, Panipat from October 2014 to May 2015.
2). As Principal with S.S. College of Polytechnic Karnal from November 2008 to October 2014.
3) As Assistant. Professor with Panipat Institute of Engineering and Technology, Panipat from August 2008 to November 2008.
4) As Lecturer, Senior Lecturer and Assistant Professor with Inderprastha Engineering College, Ghaziabad from August 2001 to August 2008.
B). Industry :- 4.9 Years
1). Worked with Bhushan Steel & Strips Limited, Site-4, Industrial Area, Sahibabad, Ghaziabad from November 1996 to August 2001 as Maintenance Engineer.
CERTIFICATIONS AND SHORT TERM COURSES
1). One week short-term course on TQM at NITTTR, Chandigarh.
2). International conference on “Challenges and Strategies for Sustainable Energy, Efficiency and Environment” at UPTU Lucknow.
3). ICTE sponsored National workshop on “Advances in Arc Welding Processes” organized by Krishna Institute of Engineering and Technology in collaboration with Indian Institute of Welding.
PUBLICATIONS AND CONFERENCE
Journals:
1. ‘Complexity Analysis of Mechanical Assemblies’ (2007) in Journal of Intelligent System Research, January - June 2007; pp 1-9
Conferences;
1. ‘Some Aspects of Flexible Manufacturing System (FMS) in Indian Manufacturing Industries’ (2006) in National Conference on Advances in Automobile Engineering (AIME- 2006), January 20-21, 2006, Jamia Millia Islamia, New Delhi, pp 449-456.
2. ‘Conflicts between DFA and DFM- How to find the best solution’ (2006) in National Conference on Recent Developments and Future Trends in Automobile Engineering (RDFTME-2006), November 3-4, 2006 NIT, Hamirpur (HP), pp 235-245.
3. ‘Design for Low Cost - A solution to the Conflict between DFM & DFA’ in National Conference on Trends & Advances in Automobile Engineering December 9-10, 2006, YMCA Institute of Engineering, Faridabad, Haryana, pp 549-554.
4. ‘Linking Modularity and Flexibility to DFM/ DFA Contradiction’ in AICTE Sponsored National Level Seminar on Robotic and Automation, March 30-31, 2007, N.C. College of Engineering, Israna (Panipat), pp 10.
5. ‘Case Study of Paharpur Cooling Towers Ltd.’ in AICTE Sponsored National Level Seminar on Robotic and Automation, March 30-31, 2007, N.C. College of Engineering, Israna (Panipat), pp 5.
RESEARCH SUMMARY
Ph.D (Pursuing) – Amity University, Noida
Mr. Madhavendra Singh Gautam
Assistant Professor
Department Of Mechanical/Automobile Engineering
EDUCATION
PROFESSIONAL EXPERIENCE
RESPONSIBILITIES AT WCTM
AWARDS, HONORS AND FELLOWSHIPS
CERTIFICATIONS AND SHORT TERM COURSES
PUBLICATIONS AND PRESENTATIONS
RESEARCH SUMMARY
Mr. M.S. Gautam’s research work is concerned with the optimization of specific work output and thermal efficiency of combined cycle at different air fuel ratio, pressure ratio and variable supplementary heating. In the present paper the pressure ratio has been taken in the range of 4 to 20 bar, air fuel ratio 50, 55, 60, and 65 and supplementary heating from 0.1 to 0.5. It is observed that specific work output and thermal efficiency improve at lower air fuel ratio, pressure ratio and supplementary heating. In the present analysis effect of supplementary heating on performance of combined cycle is discussed. It was desirable that at the (exhaust temp. of gas turbine t4a + gas turbine by passed temp.t3) should be above 813 K, otherwise the steam cycle would be inefficient resulting in lower combined cycle plant efficiency.
Mr. Gurdeep Singh Grewal
Assistant Professor
Department Mechanical/Automobile Engineering
Gurdeep Singh Grewal is an Assistant professor in the Department of Mechanical/Automobile Engineering. He is M.Tech. with specialization in Manufacturing and automation from M.D.U, B.Tech in Automobile Engineering from Punjab Technical University. He has five years teaching experience and teaches various subjects like Material science and engineering, Automobile Engineering, Theory of Machines, Fluid Machines, Engineering Drawing and Basics of Automobile Engineering at Graduate level in Engineering colleges.
His research work is concerned with Mechanical properties of Aluminium Honeycomb Structure. He has also presented a paper titled as “Evaluation of Mechanical Properties of Aluminium Honeycomb Sandwich Panel with Different Cell Sizes” international journal of R&D in engineering science and management.
Mr. Omprakash Prajapati
Assistant Professor
Department Of Automobile Engineering
EDUCATION
PROFESSIONAL EXPERIENCE
RESPONSIBILITIES AT WCTM