NAME OF FACULTY |
RESEARCH PAPERS |
Dr. Neetu Singh |
Singh, N.: “Cost Analysis for N-Policy Machining System with Spares, Service Halt, Set up and Common Cause Failure”, International Journal of System and Software Engineering, Vol. 7, No. 2, 2019, pp. 07-14. (In print) ISSN No. 2321-6017. |
Singh, N.: “Service Halt in Repairable Redundant Machining System with Degraded failure and Set-up”, International Journal of knowledge based computer systems, Vol. 6, No. 2, 2018. ISSN No. 2321-5623. |
Singh, N.: “Reliability Prediction of State dependent Retrial queue with unreliable server and Multi-Phase Repair”, IOSR Journal of Engineering, Vol. 8, No. 8, pp. 36-53, 2018, ISSN No. 2278-8719. (UGC Approved) |
Singh, N. and Rani, S.: “Recent Developments in Mathematical analysis of queues for Machine Repair Problem: A Short Survey”, in International Journal of knowledge based computer systems, Vol. 6, No. 1, pp. 23-29, 2018. ISSN No. 2321-5623. |
Singh, N..: “Sensitivity Analysis of Markovian Queue with Discouragement, Additional Servers and Threshold Policy”, International Journal of System and Software Engineering, Vol. 5, No. 1, pp. 22-32, 2017. ISSN No. 2321-6017. |
Arora, N. and Singh, N.: “Factors affecting the academic performance of College Students”, Journal of Educational Technology, Vol. 13, No. 4, pp. 47-53, 2017. ISSN No. 0973-0559. |
Singh, N., Arora, N. and Rani, S.: “Performance Prediction of Flexible Manufacturing System using Queueing Networks”, in International Journal of System and Software Engineering, Vol. 4, No. 1, pp. 1-7, 2016. ISSN No. 2321-6017. |
Arora, N., Singh, N. and Taneja, P.: “Smart Phone Usage Pattern: A Study of College Students”, International Journal of Knowledge Management and Practices, Vol. 4, No. 2, pp. 31-36, 2016. ISSN No. 2320-7523. |
Singh, N., Jain, M. and Arora, N.: “Economic lot sizing for unreliable production system with shortages”, International Journal of Mathematics in Operational Research, Vol. 7, No. 4, pp. 464-483, 2015. ISSN No. 1757-5850. (Inderscience, Scopus) |
Singh, N., Jain, M. and Sharma, N.: “Queueing System with Heterogeneous Server, Multiple Vacations and Threshold Policy”, International Journal of Inter-Disciplinary Engineering and Sciences, Vol. 1, No.1, pp. 42-55, 2014. ISSN No. 2393-9826. |
Singh, N., Jain, M. and Sharma, G. C.: “Diffusion Approximation for GX/GY/R+S Machine Repair Problem (MRP) with Mixed Spares, Balking, Reneging and Additional Removable Repairmen”, Journal of King Abdulaziz University Engineering Sciences, Vol. 24, No. 1, pp. 47-70, 2013. ISSN No. 1319-1047. |
Arora, N. and Singh, N. : “Analysis of single item deteriorating inventory model with time dependent demand and partial backlogging”, International Journal of Operations Research and Optimization, Vol. 4, No. 1, pp. 103-114, 2013. ISSN No. 2231-4741. |
Jain, M., Sharma, G. C. and Singh, N.: “Transient analysis of M/M/R machining system with mixed standbys, switching failures, balking, reneging and additional removable repairmen”, published in International Journal of Engg., Vol. 20, No. 2, pp. 169-182, 2007. ISSN No. 1728-1431. |
Jain, M., Sharma, G. C. and Singh, N.: “Transient analysis of M/M/R machining system with mixed standbys, switching failures, balking, reneging and additional removable repairmen”, published in International Journal of Engg., Vol. 20, No. 2, pp. 169-182, 2007. ISSN No. 1728-1431. |
Published in International Journal of Information and Computing Science, Vol. 11, No. 1, 2008. ISSN No. 0972-1347. |
Published in proceedings of National Conference on Information technology: Setting Trends in Modern Era & 8th Annual Conference of Indian Society of Information Theory & Applications, March 18-20, 2006. |
Jain, M., Sharma, G. C. and Singh, N.: “N-Policy for M/G/1 machine repair queueing system with spares, degraded failure, Bernoulli feedback and set up” |
Published in Assam Statistical Review, Vol. 21, No. 1, pp. 27-48, 2007. ISSN No. 0976-4291. |
Singh, N., Arora, N. and Rani, S.: “Performance Analysis of Flexible Manufacturing System using Queueing Networks”, Published in proceedings of 2nd International Conference REDSET 2015, pp. 39-44. |
Jain, M., Sharma, G. C. and Singh, N.: “Performance prediction of multi components machining system with interruption and set up” |
Published in proceedings of Conference on Differential Geometry and Topology in the Perspective of Modern Trends (DGTPMT- 2006) at Dayalbagh Educational Institute, Agra. |
Dr. Shamta Chugh |
Chugh, S., Singh, K. and Madan, D. K., 2009 - Two-dimensional static deformation of an orthotropic elastic layered half-space due to blind strike-slip fault, ISET J. Earthq. Tech., 46, 109–124. |
Madan, D. K., Chugh, S. and Singh, K., 2009- Static deformation of two coupled
orthotropic elastic half-spaces due to non-uniform slip along a very long vertical strike
slip fault, Int. J. Appl. Maths. Engg. Sci., 3, 113-127.
|
Chugh, S., Madan, D. K. and Singh, K., 2010- Static deformation due to non-uniform
slip along a very long vertical strike-slip geological fault in two-phase medium, Int. J.
Ecol. Econ. Stat., 19, 47-65.
|
Madan, D. K., Chugh, S. and Singh, K., 2011- Stresses in an anisotropic elastic plate
due to strip-loading, Int. J. Mech., 5, 57-62.
|
Chugh, S., Madan, D. K. and Singh, K., 2011- Static deformation of orthotropic elastic
layered medium due to a non-uniform discontinuity along a very long strike-slip fault,
Int. J. Engg., Sci. and Tech., 3, 69-86.
|
Chugh, S., Madan, D. K. and Singh, K., 2011- Plane strain deformation of an initially
unstressed elastic medium, Appl. Maths. Comput.(Elsvier), 217, 8683–8692.
|
Chugh, S., Singh, K. and Madan, D. K., 2011-2-D static response of an orthotropic
multilayered half-space due to a long strike-slip fault, Bull. Cal. Math. Soc., 103,
171-182.
|
Madan, D. K., Dahiya, A. and Chugh, S., 2012- Static response of transversely isotropic
elastic medium with irregularity present in the medium, Int. J. Mech. Engg., 2,1-11.
|
Madan, D. K., Dahiya, A. and Chugh, S., 2012-Static response of an anisotropic elastic
medium due to inclined line load with irregularity present in the medium, Int. J. Engg.
Sc. Res., 2, 1683-1695.
|
Dr. Suresh Pal |
Suresh Pal, R.K. Tiwari, D.C. Gupta, Vaibhav K. Saraswat and A.S. Verma, “Inter atomic force constants of binary and ternary tetrahedral semiconductors” Semiconductors, Vol.50 No.6, (795-800), 2015. |
Suresh Pal, R.K. Tiwari, D.C. Gupta and A.S. Verma, “Simplistic
theoretical model for optoelectronic properties of compound semiconductors”, Journal of Materials Physics and Chemistry, Vol. 2, (20-27), 2014. |
Suresh Pal, R.K. Tiwari, A.S. Verma and D.C. Gupta “Semi-empirical model
for electronic properties of compound semiconductors”, Corona Journal of
Science and Technology, Vol. 4, No. III, (1-6), 2015. |
Dr. Seema Chawla |
Unsteady plane poiseuille flow and heat transfer in the presence of oscillatory temperature of the lower plate. Published in India J. Theoretical Physics, India, Vol. 52, No. 3, 2004, p. 215-226. |
Steady Laminar MHD flow and heat transfer through inclined porous channel : Lower surface bounded by porous medium. Published in J. Indian Academy of Mathematics, India, Vol. 26, 2004, p. 313-322. |
Steady Laminar flow between parallel porous discs when upper disc is rotating moderately, Published in J. Ultra Scientist Physical Sciences, India, Vol. 15, 2003, p. 179-186. |
Heat transfer through MHD flow between a rotating and a stationery porous disc in the presence of heat source. Published in Bulletin Calcutta Mathematical Society, India Vol. 97, 2005, p. 433-444. |
Three dimensional Couette flow and heat transfer through a porous medium of variable permabilities, Accepted for publication in J. Indian academy of Mathematics, India. |
Effect of Slip velocity on MHD flow through inclined channel: upper wall is moving with constant velocity and lower wall is bounded by porous medium of different permabilities. Accepted for Published in J. Indian Academy of Mathematics, India. |
Dr. Shalini Chandravanshi |
Shalini Chandravanshi and S. K. Upadhyay, Natural Dyes- Surfactants Interactions, Thermodynamic and Surface Parameters, Coloration Technology 185 (2011), 1-6. |
Shalini Chandravanshi and S. K. Upadhyay, Interaction of Quercus infectoria natural dye- surfactants, micellization/adsorption of dye, Journal of Disp. Sci. and Tech. 34(10) (2013), 1308-1315. |
Shalini Chandravanshi and S. K. Upadhyay, Interaction of natural dye (Allium cepa) with ionic surfactants , Journal of Chemistry 2013 (2012), 1-6. |
Shalini Chandravanshi, S. K. Upadhyay and Abha Bhargawa, Effect of ionic
surfactant on the adsorption of Quercus infetoria natural dye on cotton fiber:
A kinetic study.. Journal of Dispersion Science and Technology 35(10) 2014, 1427-1433. |
Shalini Chandravanshi and S. K. Upadhyay, Kinetic and thermodynamic studies of natural terminalia arjuna dyeing on cotton in absence & presence of cationic surfactant, International Journal of Fiber and Textile Research, 4(2) (2014), 20-26. |
Poster presented in International Conference on “Green Technology for Greener Environment” paper title “Building Block Pathways: Glycerol and Succinic acid” organized at CCS University Meerut. |
Ms. Nisha |
Presented paper on “Population Dynamic, Resource consumption environment Interface” in National Seminar. |
Ms. Neeraj Sihmar |
Paper published on “Power Penalty Analysis in Millimeter Wave Transmission System” in International Journal of Applied Engineering Research ISSN 0973-1562, Volume 6, Number 18, (2011) at GITM, Kurukshetra. |
NAME OF FACULTY |
Conferences/ Workshop/ Seminars |
Dr. Neetu Singh |
Chaired a session in 21st Annual Conference of Vijnana Parishad of India “Modelling, Optimization and Computing for Technological and Sustainable Development (MOCTSD-2-19), SRMIST, Modinagar, Ghaziabad during April 26-28, 2019. |
Invited Talk entitled “Stochastic Decomposition for M/M/ Queue with two types of Server Breakdown and Balking” in 21st Annual Conference of Vijnana Parishad of India “Modelling, Optimization and Computing for Technological and Sustainable Development (MOCTSD-2-19), SRMIST, Modinagar, Ghaziabad during April 26-28, 2019. |
Presented paper in the conference organized by Commission for scientific and Technical Terminology, Ministry of Human Resource Development on “Applications of Technical Terminology in Modeling, Optimization and Computing Science & Technology” at SRMIST, Ghaziabad. |
Attended AICTE recognized Short term course on Optimization Techniques in Engineering,May 27-31, 2019 held at NITTTR Chandigarh. |
Presented paper in the conference organized by Commission for scientific and Technical Terminology, Ministry of Human Resource Development and IIT Roorkee during October 12-14, 2018. |
Presented paper entitled “Threshold Policy for Queueing Model with Heterogeneous Servers and Multiple Vacations” in workshop on “Applied Stochastic Models and Optimization (ASMO-17)” organized by Mathematical Colloquium, Department of Mathematics, IIT Roorkee during May 26-27, 2017. |
Attended the QIP short term course on “Stochastic Modeling and optimal Control of Engineering Systems”, organized by Department of Mathematics, IITR, Roorkee, May 22-26, 2017. |
Attended the National Workshop on “Scientific Computational Techniques”, Department of Mathematics and Statistics, Manipal University, Jaipur, Dec. 18-19, 2014. |
Organized as co-convener the conference “Renewable Energy Resources in Green Building Technology” held on Feb 08, 2013 at World College of Technology and Management and sponsored by MNRE, Govt. of India, New Delhi. |
Attended the seminar on “Existing framework of Technical & Professional Education from the perspective of Industry: Expectations and Challenges” held on June 24, 2012 at IIT Delhi. |
Attended the National Convention on “Indian higher Education-Vision for quality, Antonomy & Accountability” held during March 24-25, 2011.
|
Attended the National Seminar on “Capacity Building of Teachers of Technical Institutes in the Renewable Energy Sector” held on February, 2009 and sponsored by MNRE, Govt. of India, New Delhi. |
Presented paper entitled “Diffusion Approximation for GX/GY/r+s Machine Repair Problem (MRP) with Mixed Spares, Balking, Reneging and Additional Removable Repairmen” in “International Conference on Modeling of Engineering & Technological Problems” held during January 14-16, 2009 at BMAS Engineering College, Keetham, Agra. |
Presented paper entitled “On Stochastic Decomposition in M/M/ Queueing System with Service Interruption and Balking” in “VI International Symposium on Optimization and Statistics” held during December 29-31, 2008 at the Department of Statistics and Operations Research, Aligarh Muslim University, Aligarh. |
Participated in the D. S. T. workshop “Mathematical Modeling Optimization and Their Applications” held during April 23-27, 2007, Bharti Vidyapeeth University, Delhi. |
Presented paper entitled “State dependent M/G/1 retrial queue with unreliable server and multi-phases repair” in “72nd Annual Conference of the Indian Mathematical Society”, December 27-30, 2006, Department of Mathematics and Computer Science, Rani Durgawati University, Jabalpur. |
Presented paper entitled “Transient analysis of M/M/R machining system with mixed standbys, switching failures, balking, reneging and additional removable repairmen” in “76th Annual Session of the National Academy of Sciences, India”, “National Conference on History of Mathematics and Recent Developments” held at Department of Mathematics, Maharshi Dayanand University, Rohtak during December 20-22, 2006. |
Presented paper entitled “Performance analysis of Double ended Markovian queue for machining system with spares” in “Conference on Mathematics” Department of Mathematics & Astronomy, Lucknow University, Lucknow, November 18-19, 2006. |
Presented paper entitled “Optimal threshold policy for Markovian queue with discouragement and additional server” in “National Symposium on Recent Advances in Optimization Theory and Applications, (RAOTA-2006)” at University of Delhi during October 27-28, 2006. |
Presented paper entitled “M/M/R machine repair problem with standbys, switching failures, balking, reneging and additional repairmen” in “76th Annual Session of the National Academy of Sciences, India”, held at Indian Institute of Technology Bombay, Mumbai during October 6-8, 2006. |
Presented paper entitled “Performance prediction of multi components machining system with interruption and set up” in “Conference on Differential Geometry and Topology in the Perspective of Modern Trends” (DGTPMT- 2006) at Dayalbagh Educational Institute, Agra during February 18-19, 2006. |
Presented paper entitled “N-Policy for M/G/1 machine repair queueing system with spares, degraded failure, Bernoulli feedback and set up” in “8 th Conference of the International Academy of Physical Sciences” held in December 29-31, 2005. |
Presented paper entitled “N-policy for a machine repair system with spares and reneging” in “Conference on Mathematics” Department of Mathematics & Astronomy, Lucknow University, Lucknow, December 11-12, 2004. |
Attended the “National Conference on Modern Mathematics: Application to Information Technology”, Department of Mathematics, R.B.S. College, Agra, March 8-9, 2003. |
|
Dr. Shamta Chugh |
Contribution online as a Session Chairperson in the International Conference entitled “Mathematical Sciences” on Innovative Research in Engineering, Computers and Sciences during 19-21 January, 2018 held at Panji, Goa, India. |
Contribution online as a Session Chairperson in the International Conference on Engineering, Computers and Natural Sciences during 19-21 October, 2018 held at Panji, Goa, India. |
Contribution online as an invited Speaker in the International Conference on Engineering, Computers and Natural Sciences during 19-21 October, 2018 held at Panji, Goa, India and delivered a talk on “Geological Fault in Two Phase Medium”. |
Attended 2nd International Conference on Computational Methods Simulation and
Optimization during January 11-13, 2019 held at AITCC, Bangkok Thailand and online
presented a paper “Analysis the Effect of Irregularity on Static Response of
Transversely Isotropic Elastic Medium”.
|
Attended International Conference on Innovative Research in Engineering, Computers
and Sciences during January 19-21, 2018 held at Panji, Goa and presented a paper
“Deformation of an Orthotropic Elastic Medium Possessing Irregularity at the interface”
|
Attended Ist International Conference on Computational Methods Simulation and
Optimization during June 22-24, 2018 held at AITCC, Bangkok Thailand and online
presented a paper “Deformation in a Transversely Isotropic Elastic Plate due to Strip
Loading”.
|
Attended National Conference on Recent Trends in Science & Technology: A
Computational Approach on March 22, 2018 held at CH. Bansi Lal University, Bhiwani
and presented a paper entitled “Stresses in a Transversely Isotropic Elastic Plate due to
Strip-Loading”.
|
Attended National Conference on Global Challenges-Role of Sciences & technology
in Giving Their Solutions during March 3-4, 2012 held at TITS, Bhiwani and
presented a paper entitled “Static deformation of an orthotropic multilayered half-
space”.
|
Attended National Conference on ‘Women Entrepreneurships Challenges and
Opportunities’ by Delhi Management Association and Indus Business Academy
(Greater Noida) on December 16, 2010.
|
Attended 1st International Conference on ‘Mathematics and Soft Computing’ during
December 4-5, 2010 held at NCCE, Israna, Panipat and presented a paper entitled
“Stresses due to strip-loading in a monoclinic elastic plate”.
|
Attended National Conference on Mathematical Modelling and Simulation during March 20-21, 2010 held at G.J.U.S &T., Hisar and presented the paper entitled “Static
deformation due to non-uniform slips in two-phase orthotropic elastic media”.
|
Attended 9th National Conference on Information Technology and Operational Research Applications during December 8-9, 2007 held at Graduate School of Business & Administration, Greater Noida, Uttar Pradesh and presented a paper entitled “Crustal
deformation due to strike-slip faulting in the earth”.
|
Attended 8th National Level Conference on “Information Technology: Setting Trends in Modern Era” during 18-20 March, 2006 held at NCCE, Israna, Panipat & presented a paper entitled ‘Two-dimensional deformation analysis of an orthotropic half-space due a long inclined strike-slip fault’ at finite width. |
Attended Workshop on “Art of Learning and Research Guidelines” during October 18-19, 2013 held at NCCE, Israna, Panipat. |
Attended National Workshop on ‘Wireless and Microwave Communication: Future
Trends’ on April 30, 2011 held at SDITM, Israna, Panipat
|
Attended National Workshop on ‘Recent Trends in Mathematics & Computing’ on March 13, 2010 held at TITS, Bhiwani. |
Attended State-Level Workshop on ‘Cyber Security and E-mail Applications’ during
December 21-22, 2009 held at SDITM, Israna, Panipat.
|
Attended National Seminar on ‘Mathematical Modeling in Science & Technology’ on
18 Aug, 2012 at TITS, Bhiwani and presented a paper entitled “A note on the stress
ratios at the interface in an anti-plane strain problem”.
|
Attended AICTE sponsored National Seminar on Application of Mathematics in
Engineering Sciences during March 17, 2012 held at NCCE, Israna, Panipat and
presented a paper entitled “Two dimensional eigen value problem in electromagenatic
using finite element method”.
|
Attended AICTE Sponsored National Seminar on Challenges in Software Engineering
Research & Practices during March 30-31, 2010 held at NCCE, Israna (Panipat) and
presented the paper entitled “Static deformation due to non-uniform slip along a very
long strike-slip fault”.
|
Attended AICTE recognized Short term course on Optimization Techniques in Engineering During May 27-31, 2019 held at NITTTR Chandigarh. |
Attended AICTE sponsored Faculty Development Programme on Solar Energy on 11-23 May, 2015 at MRU, Faridabad. |
Attended AICTE sponsored National Level Staff Development Programme on “Smart
Materials” during July 19-31, 2010 held at SDITM, Israna (Panipat) and presented a
paper entitled “2-D static response of an orthotropic multilayered half-space due to a
long strike-slip fault”.
|
AICTE sponsored National Level Staff Development Programme on “Smart Materials” during July 19-31, 2010 held at SDITM, Israna (Panipat) and presented a paper entitled “Faults: Source of Earthquakes”. |
Attended Faculty Development Programme on Entrepreneurship Development & Small Business Management” during December 1-14, 2009 held at NCCE, Israna, Panipat. |
|
Ms. Bhumika |
NWMC-2019, National Workshop on Material Chemistry, “Nano and Composite Materials”, organized by DAE-BRNS (BARC, Mumbai), at Department of Chemistry, Faculty of Sciences, Manipal University, Jaipur, Rajasthan (08-09 Nov., 2019). |
STS-2019, “Stewardship towards Sustainability”, International Conference, organized by Center of Research and Development, SGT University, Gurugram (06-07, Sept., 2019). |
|